Stainless Steel Cable Rails > Swageless Fitting Installation Instructions
1 - Place the cable through the main body of the fitting.
2. Insert the copper sleeve to the center strand and spread all wires around the sleeve evenly.
3 - Adjust the wire to the same level and push the wire and sleeve down.
4 - Place the wedge on top of the copper sleeve and wire. (For 3/8" cable size, the additional round cylinder part should be placed on top of the sleeve before place the wedge.)
5 - Place the top cap and tighten with wrench.
6 - You are ready to go!
Note: Before install, make sure each fitting has one piece of copper sleeve and one piece of wedge inside.
