Transportation Cargo Control > Winches & Winch Bars
WARNING: Mount and position the winch so that the latch/pawl drops into the gear sprocket teeth by its own weight. For weld-on type winches, a continuous 1/4” fillet weld, 4” long on both sides of the winch frame with 1/8” minimum penetration is required. (Use a filler wire compatible with ANSI 1015 steel.) Portable and slider winches must be positioned not to interfere with any other trailer components (i.e., tire clearance). Set screws on portable winches should be snug tightened only. Over tightening can cause bracket to bend or break, resulting in possible failure and loss of tie-down. Portable winches must be removed from trailer and stored when not in use.
All our winches, when installed properly, provide for a safe and secure method of cargo tie-down on flat bed style trailers. They are made from medium carbon steel and meet all requirements of the DOT, CVSA and the CHP. For use with 2”, 3” & 4” webbing and cable.
Winches
| Part No. | DESCRIPTION | WORKING LOAD LIMIT (LBS.) |
POUNDS EACH |
PRICE EACH |
Buy | |
 |
CC5850 | Standard Bottom Mount | 5,000 | 9.80 | $38.17 | |
 |
CC5854 | Combination bottom mount | 5,000 | 11.70 | 46.29 | |
 |
CC5860 | Standard low profile side mount | 5,000 | 8.50 | 37.91 | |
 |
CC5864 | Combination low profile side mount | 5,000 | 9.80 | 43.97 |
| Part No. | DESCRIPTION | WORKING LOAD LIMIT (LBS.) |
POUNDS EACH |
PRICE EACH |
Buy | |
 |
CC5900 | Standard Slider Winch | 5,000 | 10.70 | $45.72 | |
 |
CC5906 | Storable Slider Winch | 5,000 | 12.10 | 46.04 |
| Part No. | DESCRIPTION | WORKING LOAD LIMIT (LBS.) |
POUNDS EACH |
PRICE EACH |
Buy | |
 |
CC5955 | Portable standard bottom mount | 5,000 | 9.30 | $46.09 | |
 |
CC5965 | Portable low profile side mount | 5,000 | 9.50 | 45.73 |
| Part No. | DESCRIPTION | WORKING LOAD LIMIT (LBS.) |
POUNDS EACH |
PRICE EACH |
Buy | |
 |
CC5820 | Ratchet style | 3,335 | 3.55 | $18.04 | |
 |
CC5822 | Standard winch style | 3,335 | 3.10 | 17.38 |
Winch Bars
Winch bars feature a knurled handle for a safe grip as well as tapered case hardened
ribbed nose piece for strength and to prevent slippage.
| Part No. | DESCRIPTION | FINISH | LENGTH (INCHES) |
POUNDS EACH |
PRICE EACH |
Buy | |
 |
CC5505 | Standard winch bar |
Painted | 32.5 | 5.3 | $29.11 | |
 |
CC5506 | Standard winch bar |
Chrome | 32.5 | 5.3 | 33.25 | |
 |
CC5515 | Combination winch bar |
Painted | 37.0 | 6.8 | 37.83 | |
 |
CC5516 | Combination winch bar |
Chrome | 37.0 | 6.8 | 41.91 |
Hardware
| Part No. | DESCRIPTION | POUNDS EACH |
PRICE EACH |
Buy | |
 |
CC5626 | Weld-On “C” hook | 0.83 | $10.15 | |
 |
CC5642 | HD Beam Socket | 1.00 | $5.62 | |
 |
CC5634 | 4” Rubber Corner | 0.92 | 5.13 | |
 |
CC5630 | 4” Metal Corner | 1.30 | 7.37 | |
 |
CC5680 | 4” Plastic Corner | 0.30 | 3.27 | |
 |
CC5656 | G-70 Floor Chain Anchor (3/8” Chain) |
3.45 | 39.80 | |
 |
CC5635 | 16” Galvanized Corner | 2.20 | 14.51 | |
 |
CC5695 | Strap Winder | 2.00 | 27.42 | |
 |
CC5620 | CargoBar Rack (for Square Bars) |
6.25 | 47.66 |